首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   1985篇
  免费   422篇
  国内免费   423篇
测绘学   334篇
大气科学   247篇
地球物理   635篇
地质学   1031篇
海洋学   193篇
天文学   61篇
综合类   181篇
自然地理   148篇
  2024年   4篇
  2023年   22篇
  2022年   43篇
  2021年   67篇
  2020年   62篇
  2019年   88篇
  2018年   76篇
  2017年   92篇
  2016年   88篇
  2015年   111篇
  2014年   116篇
  2013年   101篇
  2012年   144篇
  2011年   142篇
  2010年   128篇
  2009年   127篇
  2008年   117篇
  2007年   139篇
  2006年   132篇
  2005年   110篇
  2004年   103篇
  2003年   79篇
  2002年   86篇
  2001年   57篇
  2000年   78篇
  1999年   82篇
  1998年   49篇
  1997年   45篇
  1996年   49篇
  1995年   53篇
  1994年   50篇
  1993年   43篇
  1992年   34篇
  1991年   27篇
  1990年   15篇
  1989年   15篇
  1988年   17篇
  1987年   16篇
  1986年   6篇
  1985年   8篇
  1984年   3篇
  1983年   1篇
  1981年   1篇
  1980年   1篇
  1979年   1篇
  1978年   2篇
排序方式: 共有2830条查询结果,搜索用时 15 毫秒
1.
In this work,problems encountered by tri-butyl phosphate( TBP) in the industrialization of lithium extraction from salt lake brine were discussed in detail. The behavior of N,N-bi-( 2-ethylhexyl) acetamide( N523) during lithium extraction was investigated,and its disadvantages were analyzed in the view of practical application. An N523-TBP mixture extraction system was proposed to alleviate or avoid the defects that N523 and TBP met when they were used separately. The optimal composition of this mixture extraction system was determined to be 20% N523-30% TBP-50% kerosene.The effects of brine acidity,Fe/Li molarity ratio,phase ratio and chloride ion concentration on lithium extraction efficiency were discussed. The operation conditions in single-stage extraction were optimized as brine acidity = 0. 05 mol/L,Fe/Li molarity ratio = 1. 3,and phase ratio = 2. The high concentration of chloride ions in brine was beneficial for the extraction of lithium. The structure of the extracted complex was proposed as( LiFeCl_4·n N523·m TBP)·( 2-n) N523·( 2-m) TBP( m + n = 2) by chemical analysis and slope-fitting methods. The extraction thermodynamic functions were calculated preliminarily,and the results suggested that the extraction process was an exothermic( ΔH 0) and spontaneous( ΔG 0) reaction,and the degree of disorder increased( ΔS 0) during the extraction process. This work will give some guidance to the lithium industry of Qinghai in both the fundamental theory and practical application.  相似文献   
2.
In this study, we investigate the metamorphic history of the Assynt and Gruinard blocks of the Archean Lewisian Complex, northwest Scotland, which are considered by some to represent discrete crustal terranes. For samples of mafic and intermediate rocks, phase diagrams were constructed in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (NCKFMASHTO) system using whole‐rock compositions. Our results indicate that all samples equilibrated at similar peak metamorphic conditions of ~8–10 kbar and ~900–1,000°C, consistent with field evidence for in situ partial melting and the classic interpretation of the central region of the Lewisian Complex as representing a single crustal block. Melt‐reintegration modelling was employed in order to estimate probable protolith compositions. Phase equilibria calculated for these modelled undepleted precursors match well with those determined for a subsolidus amphibolite from Gairloch in the southern region of the Lewisian Complex. Both subsolidus lithologies exhibit similar phase relations and potential melt fertility, with both expected to produce orthopyroxene‐bearing hornblende granulites, with or without garnet, at the conditions inferred for the Badcallian metamorphic peak. For fully hydrated protoliths, prograde melting is predicted to first occur at ~620°C and ~9.5 kbar, with up to 45% partial melt predicted to form at peak conditions in a closed‐system environment. Partial melts calculated for both compositions between 610 and 1,050°C are mostly trondhjemitic. Although the melt‐reintegrated granulite is predicted to produce more potassic (granitic) melts at ~700–900°C, the modelled melts are consistent with the measured compositions of felsic sheets from the central region Lewisian Complex.  相似文献   
3.
针对Android手机GNSS伪距定位精度较低的问题,利用手机端观测信息,通过载波相位/多普勒平滑伪距改善手机端伪距观测值的质量,从而达到提高定位精度的效果。首先给出了Android手机GNSS原始观测量的获取方法,然后推导了载波相位平滑伪距和多普勒平滑伪距算法模型,并设计合理有效的试验对算法的精度进行评定。试验结果表明:在手机端静态定位中载波相位和多普勒平滑算法均可提高原始伪距的定位精度,且多普勒平滑算法表现更优;在手机端动态定位中多普勒平滑算法可获得比原始伪距更优的定位精度,但是载波相位平滑算法较原始伪距更差;由于硬件的制约手机端周跳和信号失锁严重,占比超过50%,载波相位在手机端的可用性较低;多普勒平滑算法的最优平滑时间常数小于等于10 s,具有实时动态定位的巨大潜力。  相似文献   
4.
为建立高精度的边坡位移预测模型,采用相空间重构(PSR)将边坡位移时间序列数据转换为多维数据,同时构造小波核函数改进的支持向量机模型,建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机(SVM)模型、小波支持向量机(WSVM)模型和基于相空间重构的支持向量机(PSR-SVM)模型预测结果进行对比,通过平均绝对误差(MAE)、平均绝对误差百分比(MAPE)和均方根误差(RMSE)3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明,PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型,边坡位移预测的精度明显提升。  相似文献   
5.
为实现麻痹性贝类毒素(paralytic shellfish poisoning,PSP)的实时监控与提前预警,本研究构建了基于固相萃取技术(solid phase extraction,SPE)与固相吸附毒素跟踪技术(solid phase adsorption toxin tracking,SPATT)的水体中PSP检测方法,重点优化了吸附材料及前处理方法,评价了回收率、检出限等指标,并将方法应用于2019年春季秦皇岛山海关海域PSP消长过程的监测中,比较评估了两种方法的监控预警效果。结果表明:SPE方法选用ENVI-Carb 500mg/6mL固相萃取柱,过样体积为50mL,13种PSP组分的平均回收率为82.2%±10.0%、检出限为4.0-20.0ng/L;SPATT方法选用SP207大孔吸附树脂,洗脱时间为静置Id最佳,整体回收率约为9.2%;在实际应用中,结合产毒藻密度及贻贝富集毒素含量的变化,发现SPE方法的检测结果可实时表征海域PSP风险状况,对于贻贝中PSP的预警效果也显著优于SAPTT方法,后者不仅因监控方式相对滞后一个监测周期,且灵敏度及准确性均较差。对于秦皇岛海域,当SPE方法检测结果达到100ng STX eq/L时,该海域贻贝中PSP残留将具有潜在的食用安全风险,跟踪过程表明这一阈值可提前两周预警贻贝富集毒素含量超出我国限量标准(800μg STX eq/kg),这对于强化风险警示并制定防范措施具有积极作用。  相似文献   
6.
利用再分析资料以及混合层海温诊断方程, 研究1997—1998与2015—2016年超级厄尔尼诺次年北大西洋海表温度异常(sea surface temperature anomalies, SSTA)的差异及成因。结果显示, 北大西洋SSTA在1998年春季呈明显正负正三极型式分布, 而在2016年呈弱的负正负型态。诊断热带北大西洋SSTA的影响因素表明, 1998年春季暖SSTA除了之前研究强调的海洋表面向大气的潜热输送异常减少, 以及吸收太阳辐射的增加外, 海洋动力过程即Ekman纬向漂流也起着重要的作用。热力过程与厄尔尼诺峰值后出现的北大西洋涛动(North Atlantic Oscillation, NAO)负位相有关, 其可引起亚速尔高压减弱, 产生西南风异常, 通过风-蒸发-海表温度(sea surface temperature, SST)反馈机制使热带北大西洋蒸发减弱, 海表增暖, 沃克环流下沉支的东移对这一增暖也有贡献。与1997—1998厄尔尼诺事件不同, 2015—2016厄尔尼诺事件没有强迫出负位相NAO, 而是出现弱NAO正位相, 热带北大西洋为弱的东风异常, 使海表发生一定的冷却, 形成2016春季北大西洋SSTA与1998年的明显差异。  相似文献   
7.
Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   
8.
使用GRACE卫星星载GPS观测数据,研究地面获取的先验PCV模型和利用残差法估计的在轨PCV模型对低轨卫星精密定轨的影响,并采用GFZ精密轨道对比和SLR检核手段对其进行评估。结果表明,使用先验PCV模型会降低GRACE卫星定轨精度,相反利用在轨PCV模型可以提高定轨精度,提升数量级可达mm级。
  相似文献   
9.
中国探月3期任务中,月球交会对接技术是任务成功的重要保障.利用嫦娥3号(CE03)绕月飞行的VLBI (Very Long Baseline Interferometry)时延数据,模拟仿真绕月交会对接过程中,同波束VLBI观测模式下,差分群时延的变化情况.仿真结果显示,在远程导引段,轨道器和上升组合体轨道距离保持100 km,持续半小时,差分群时延很好地反映了两者的轨道信息,可以用于定轨定位;自主控制段,上升组合体靠近轨道器,在轨道距离从5 km减小到20 m过程中,上升组合体加速追赶轨道器时,差分群时延快速趋近于0,上升组合体减速远离轨道器时,差分群时延绝对值快速变大.最后,利用嫦娥3号奔月段同时发射两个DOR (Differential One-Ranging)信号的VLBI时延数据,计算差分相时延,初步展示了月球交会对接过程中同波束VLBI差分相时延的误差情况.  相似文献   
10.
We have investigated the effects of different Fe2O3 bulk contents on the calculated phase equilibria of low‐T/intermediate‐P metasedimentary rocks. Thermodynamic modelling within the MnO–Na2O–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (MnNKFMASHTO) chemical system of chloritoid‐bearing hematite‐rich metasedimentary rocks from the Variscan basement of the Pisani Mountains (Northern Apennines, Italy) fails to reproduce the observed mineral compositions when the bulk Fe2O3 is determined through titration. The mismatch between observed and computed mineral compositions and assemblage is resolved by tuning the effective ferric iron content by P–XFe2O3 diagrams, obtaining equilibration conditions of 475 °C and 9–10 kbar related to a post‐compressional phase of the Alpine collision. The introduction of ferric iron affects the stability of the main rock‐forming silicates that often yield important thermobaric information. In Fe2O3‐rich compositions, garnet‐ and carpholite‐in curves shift towards higher temperatures with respect to the Fe2O3‐free systems. The presence of a ferric‐iron oxide (hematite) prevents the formation of biotite in the mineral assemblage even at temperatures approaching 550 °C. The use of P–T–XFe2O3 phase diagrams may also provide P–T information in common greenschist facies metasedimentary rocks.  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号